2.92mm K-type zero insertion force plate to plate vertical connection mm wave coaxial connector -- patented product

  The products are divided into two series: 20g products and 40g products. Only one connector can realize the connection function between boards, making the connection easier (the current board to board connection system needs two socket connectors or an additional adapter to realize the above connection function, and the frequency is low).

Product features:
1. Plate to plate vertical connection, surface mounting, end contact, zero insertion force, simple and reliable structure, wide frequency band;
2. Coplanar transmission between surface mount transmission line and center pin, large position tolerance range;
3. Miniaturization, excellent electrical performance, low price, economic design (only one connector), more than 10000 times of repeated connection, and specific products can be designed according to customer requirements.

Introduction:
   Due to the integration, miniaturization and low cost of the base station, more and more of the original modules will be connected through the external backplane cable components, which will be replaced by the internal parallel circuit board to circuit board direct interconnection system. The number of interconnection systems between the same pair of parallel circuit boards is also increasing, and the market share of the circuit board to circuit board interconnection system in the RF connector market will be increasing Big.
   The newly developed board to board vertical RF coaxial connector of our company is a kind of RF coaxial connector that can adapt to large axial and radial tolerance of circuit board to circuit board or RF module to RF module.
   One end of this series of connectors can be connected with the circuit board by SMT welding or screw connection, and the other end can be contacted with the circuit board by elastic inner and outer conductors. Therefore, only one connector of this series of connectors can realize the inter board connection function, making the connection easier. The current board to board connection system needs two socket connectors or an additional adapter To realize the above connection function.
   This series of connectors adopt the advanced and reliable fuzz button without welding and compression interconnection as the central conductor, which has the characteristics of plate to plate vertical connection, surface mounting, end contact, zero insertion and extraction force, etc., the structure is more simple and reliable, the manufacturing is easy, the cost is low, and it can transmit the signal of large power. In some applications with special requirements, such as military communication base station, the connector becomes the first choice.